Manufacture & process
Antares makes paint rollers and paint brushes in Ruse, Bulgaria, in a closed production cycle. Only raw materials are bought in. Tubes, caps, handles, frames, rollers and brushes are all made in-house, and raw materials are kept in stock for at least eight months ahead. This page gives a short overview of the process; each step links to a page with technical details.
How paint rollers are made
- Tube extrusion – roller tubes are extruded from polymer granules and cut to length on the line.
- Fabric slitting – roller fabrics are slit into strips of exact width.
- Thermobonding – the fabric strip is wound onto the heated tube and bonded without adhesive.
- Cutting and finishing – long rollers are cut to length, and both edges are bevelled.
- Flock line – flock rollers are coated with polyamide fibres in an electrostatic field and checked by machine vision.
- Roller frames and injection moulding – frames are formed from steel wire, and handles and end caps are moulded in Antares' own moulds.
- Shrink wrapping – finished rollers are packed in heat-shrink film on automatic lines.
How paint brushes are made
- Bristle mixing – up to four types of filament are blended in a set ratio, kept as a recipe.
- Automated paint brush line – the filament is set in the ferrule with epoxy resin, the handle is nailed on, and the brush is cleaned, wrapped, printed and labelled. An operator inspects every brush before boxing.
See the paint brush line
Antares brand or private label
The same production is used for the Antares brand and for products made under the customer's own brand. Distributors can read about supply terms on Export & Wholesale, and brand owners about private label production. See all production technologies.
